A-22
ASI BROADBAND BIAS TEES
| CHANNELS | PART NO. |
SIZE** |
PRICE | |||
|
RF |
BIAS | CONTROL | N
CONNECTORS |
SMA CONNECTORS | ||
| 1 MHz - 4 GHz | DC | None | 4BT-NN | 4BT-MM | 1.3" x 1.3" x .75" | $150.00 |
| 2 - 18 GHz | DC | None | 182BT-NN | 182BT-MM | .75" x .75" x .62" | 290.00 |
| 2 - 18 GHz | DC | 1 KHz - 30 KHz | N/A | 182CBT-MM | .75" x 1.2" x .62" | POR |
| PIN PACKAGED UNITS | ||||||
| 10-500 MHz | DC | None | BTP-A01 | 0.6" dia. TO-8 | POR | |
| 10-500 MHz | DC | None | BTP-01 (Fits ASI Cascades) | 0.5" dia. TO-8 | POR | |
| ASI SPECIAL PURPOSE BIAS TEES | ||||||
| 3.7 - 4.2 GHz | DC | None | DCP-1+ | N/A | .75" x 1" x 1" | POR |
| 3.7 - 4.2 GHz | DC | None | DCB-42* | N/A | .62" x .87" x 1.25" | 96.00 |
* Supplied with N Jack connectors and one each N Plug x N Plug adapter for universal insertion. Exact equivalent to Avantek ® DCB-42.
+ Supplied with N Jack by N Plug connectors and pigtail leads for DC insertion.
** Connectors not included in body size dimensions.
The ASI bias tees consist of a DC blocking capacitor on one RF arm and an RF choke on the DC arm. Unless otherwise specified, the DC and control connections are solder terminals. The "choke" coils can pass up to 1A DC current. 500 mA is a recommended continuous duty safe limit.
Typical SWR on both RF arms is 1.3:1 below 4 GHz and 1.8:1 between 4 and 18 GHz. Insertion loss is typically 0.5 dB below 4 GHz and 1.0 dB between 4 and 18 GHz.
APPLICATIONS
® Registered Trademark of Avantek, Inc.
Email: