B-14

Next »

RS-232 Style Shielded Cable Assemblies



Number of
Conductors

Cable
Capacitance
pF/ft
Standard
Connections *
Description
Diameter
Cable
Per Ft
4
J-EM04A
10 - 14
 Pins 2, 3, 7, 8 & 20
Braided Shield w/Foil
1.30
6
I-1715
15.5
 Pins 1, 2, 3, 7, 8 & 20
Braided Shield w/Foil
1.30
7
J-EM07A
10 - 14
 Pins 2 -4, 6 - 8 & 20
Braided Shield w/Foil
1.70
10
I-1716
15.5
 Pins 1 - 8 & 20
Braided Shield w/Foil
1.70
12
J-EM12A
10 - 14
 Pins 1 - 8, 15, 17, 20 & 22
Braided shield w/Foil
1.75
15
1717
15.5
 Pins 1 - 8, 13 - 15, 17, 20 & 24
Braided Shield w/Foil
1.80
16
J-EM16A
10 - 14
 Pins 1 - 8, 15, 17, & 20 - 25
Braided Shield w/Foil
1.80
25
J-EM25A
10 - 14
 Lines 1 - 25
Braided Shield w/Foil
1.90
36
BLDN 9837
15.5
 Pins 1, 2 & 4 - 37
Braided Shield w/Foil
3.36
37
J-EQ37A
10 - 14
 Lines 1 - 37
Aluminum Polyester Foil
1.90


All cable is 24 AWG Twisted pair construction. No Drain Wire. Standard RF Depot assembly uses crimp pins with only connected pins inserted. All cables are supplied with deep metal backshell and a straight clamp.



Shell Size
Receptacle (Female)
Plug (Male)
Designator+
Shell Part No.
Assembled Price
Designator+
Shell Part No.
Assembled Price
9
9S
C/E 11.3316
9.45
9P
C/E 11.3306
9.25
15
15S
C/E 11.3336
12.50
15P
C/E 11.3326
12.30
25
25S
C/E 11.3356
15.00
25P
C/E 11.3346
14.50
37
37S
C/E 11.3376
20.00
37P
C/E 11.3366
19.25


* Pins 8 & 20 are jumpered together at each connector unless otherwise specified. Add $0.75 to each connector for jumpering.

# Receptacle Contact (Socket) is C/E 11.3145 - 05, ($9.12/100pk) and Plug Contact Pin is C/E 11.3141 - 05, ($7.18/100pk). Plating is 0.000010 in gold over .000030 in nickel.

+ For right angle metal backshell suffix designator S becomes RS for Receptacle and designator P becomes RP for Plug.

Typical part number is assembled with: Cable Designator - Connector 1 Connector 2 - length in tenth's of inches.

An example of a part number for a 5 ft (60 inch), 6 conductor cable with a D9S right angle connector on one end and a D9P straight connector on the other is: 6 - D9RSD9P - 600.

For special cables or other cables with non standard pinning, markers, labelling or special packaging requirements, or combinations of different connectors the factory will create a drawing for customer approval and assign a special part number. Example: 7998-XXX.


RF Depot.com Inc.

10101 F. Bacon Drive, Beltsville MD 20705
1-800-950-8555 / 301-595-5395 / FAX 301-595-0050

Email:our email address



Home / Adapters / Amplifiers / Attenuators / Bias Tees / Cable Assemblies / Coaxial Cable / Coaxial Couplers / Connectors / Cross References / Isolators & Circulators / Multicouplers / Power Dividers / Power Supplies / RF Cases / Special Chassis Work / Terminations / Tools and Accessories / Franchised Distributor for: / Our Sales Representatives


Copyright © 2008 RF Depot. All Rights Reserved.